Mercedes Benz said it want's to show flashing brake lights improve car safety by preventing
rear-end crashes.
1986 NHTSA law change that
mandated that all new passenger cars include a center high mounted stop
lamp, or “CHMSL” — a third stop lamp, or brake light, mounted on the
rear of a vehicle. “We saw a safety benefit — a decline in crashes,” he
said. “Anything you can do to raise visibility of a vehicle is good."
Rae Tyson, a spokesperson for the
NHTSA.
Why not install the
Compact Blinking Smart Stop rear end collision
avoidance system the low
cost safety device for under $23.00 -
It can make a difference! - Fits all Cars ,Trucks and
SUV's
Works with standard bulbs as well as LED
lights.
Do you wonder how well
other drivers are paying attention to you in your
vehicle while braking? This Blinking Smart Stop
increases your visibility to add additional safety and
awareness to other road users.
We all know what we do when we
see these warnings So why not install a
Blinking Smart
Stop
How often have you almost
rear-ended someone because you didn’t realize they were
braking? What if the car in front of you had
an additional device to grab you attention to alert you
that they were braking.
The Blinking Smart Stop is a compact visual
aid that alerts the driver following .
See theFactsof how many Rear End
Collisions happen every year just in the U.S. alone and what
you can do to help minimize this.
Click Here
Lets you maximize your Brake Light effectiveness when you
apply your brakes. It causes your center high mounted
brake light to automatically emit a visual alerting signal
of 6 light flashes in Appx.2.2 Seconds before entering into a steady Brake Light
ON condition. Product rated at 6amps
Fits all fits all Cars, SUV's
and Trucks
Works with all incandescent bulbs
and LED lighting technologies
Same our standard version but when the brakes are applied
for the first time causing your third brake light to flash 6
times in Appx.2.2 Seconds and then turn solid. Touching your brakes again
within 8 seconds will cause your third brake light to turn
on normally without flashing. Product rated at 6amps
Fits all fits all Cars, SUV's
and Trucks
Works with all incandescent bulbs
and LED lighting technologies
This unique product lets you maximize your Brake Light effectiveness when you
apply your brakes. It causes your center high mounted
brake light to automatically emit a visual alerting signal
of 6 light flashes in Appx.2.2 Seconds before entering into
a steady Brake Light ON condition.
then your center high mounted brake light will
automatically
flash 3
times then a flashing sequence of 3 flashes every 3 seconds.
This sequence will continue all the time the brakes are
appliedProduct rated at 6amps
Fits all fits all Cars, SUV's and Trucks
Works with all incandescent bulbs
and LED lighting technologies
Lets you maximize your Brake Light effectiveness when you
apply your brakes. Smart Stop Plus was designed with a
second output and is intended to connect directly to the
Main "Left" and "Right" brake lights, to automatically emit
a visual alerting signal of 6 light flashes in Appx.2.2
Seconds before entering
into a steady Brake Light ON condition.
.
Product rated at 30amps
Will only work with
all vehicles with separate brake light connections
Works with all incandescent bulbs
and LED lighting technologies
Same our Plus version but when the brakes are applied
for the first time causing your third brake light to flash 6
times in Appx.2.2 Seconds and then turn solid. Touching
your brakes again within 8 seconds will cause your Right and
Left brake lights to turn on normally without flashing.
Lets you maximize your Brake Light effectiveness when you
apply your brakes. Smart Stop Plus Delay was designed with
two outputs and is intended to connect directly to the
Main "Left" and "Right" brake lights.
Product rated at 30 amps
Will only work with
all vehicles with separate brake light connections
Works with all incandescent bulbs
and LED lighting technologies
Blinking Smart Stop Plus 3
is a
device to catch the attention of the driver behind you.
Applying your brakes will cause your existing 2
Main
"Left" and "Right" brake lights. and the (CHML) 3rd brake light to flash rapidly
6 times in Appx.2.2
and then stay on
solid as long as you have your foot on the brake pedal. The
rapid blinking catches the attention of the driver behind you
after which, many of them tend to keep their distance. Product rated at 30amps
Will only work with
all vehicles with separate brake light connections
Works with all incandescent bulbs
and LED lighting technologies
Same our Plus 3 version but when the brakes are applied
for the first time causing all your brake lights to flash 6
times in Appx.2.2 Seconds and then turn solid. Touching
your brakes again within 8 seconds will cause your Main
"Left" and "Right" brake lights. and the (CHML)
3rd brake lights to turn on normally without flashing.
Lets you maximize your Brake Light effectiveness when you
apply your brakes. Smart Stop Plus Delay was designed with a
three outputs and is intended to connect directly to the
Main "Left" and "Right" and your
(CHML) 3rd brake lights.
Product rated at 30amps
Will only work with
all vehicles with separate brake light connections
Works with all incandescent bulbs
and LED lighting technologies
For
auto safety accessories, Lighting and other Laws vary from state to state
and country to country. Kahtec Technologies Int. make no representation or warranty to the
legality of its products for street use on any vehicle or in any location.